Mid Mount Vector

[Turbo]

Bought a yamaha vector this summer that had a custom front mount turbo system. Was going to make only a little change and it turned into pretty much a completely different custom turbo kit. Incorporating some of the different things I like from different turbo kits.

Hope to have it together by the 1st of dec.

Will be running pump gas with a meth injection kit. Sled already has a huge drop and roll as well as a 162 2.5 track. I have some ideas as well for making the stock suspension better for climbing that I will be trying.

Figured I would share some pictures of it.

The way it looked when I got it.


Tore down and cleaned

Cut out the tunnel and bulkhead

Closed it back up

Motor back in

[Turbo]

Rider Forward

Rev tank


Turbo Ready to be employed, and 3 inch tubing for downpipe

Intercooler intake end tank and carb flanges ready to be welded

Machining new header flange

[Turbo]

Header flange bolted up.

I hope to have some pictures of the header and the intercooler welded up by the end of the week.

[heinracing]

looking good

[Turbo]

Couple more things done, Trimmed the foam in the yamaha boss seat to fit over rev tank. And looks great little scary trimming a $400 seat. Also rev tank has all the mounts done. Things will start to come together very quickly now.

Here are few pictures.


Header All tacked up ready to be welded.

Header in place, to get down pipe done.

[heinracing]

get that bad boy done