900 2 wheel kit??

[Reckitt]

can anyone help me find the information what what needs to be purchased to make the 2 wheel kit for my 900.. Just looking to build one with stock parts.. Can anyone help??

[BIGGDAWG]

order the rear axle, spacers and end caps for a 09 or newer dragon
in the pic you need 2 of #8 and 2 of #10 and #13 and #12




#2 SKU: 7555806 WASHER,FLAT(10) $2.97

#10 SKU: 7555918 BUSHING(10) $2.97

#12 SKU: 5333283 SPACER,IDLER,CTR. $9.65

#13 SKU: 5135305 SHAFT-IDLER,RMK $15.22

[Reckitt]

Thanks for the info.. I foound what I need, but I also have a bunch of those center spacers from Edge and IQ chassis.. I could just cut one to length and save a few $$.. Anyone know how long that spacer is here on the Dragon??

[BIGGDAWG]

you sure can i did that on a couple of sleds myself. don't remember the measurements though. i copied another 2 wheel axle off another sled when i did mine. i cut down the stock axle and tapped it. then cut down 2 bushings.

[Reckitt]

I can just buy the axle, but do you happen to know the length of the spacer so I can just cut the one I have?? I also wanted to ask, why the shorter axle needed to be used?? If the axle stayed the same length how come you couldnt just leave the outside adjustment blocks on it to take up the slack.. Or since the 1 wheel will be gone it will still have space that needs taken up??