i6 wide track

[Zip]

how bad is it to throw a 16 wide track under an 02 mtn 800 with fabcraft tunnel and lightweihgt u coolers?Need a new track and figured I would go 16 wide if it wasnt to bad

[PCDOC]

I put a 16" under my 02 800 cat with a stock tunnel and the only thing you need to do is grind some of the rivets down inside the tunnel. Not sure what you will find for 16" wide and 2.52 pitch track. I changed my drive shaft and axle over to a king cat extrovert setup at the same time and that's the 3 pitch setup.

[Booner]

Yup. I just threw a 16" track under my 01 800. There's a few rivets I ground down, and I installed 7.12" idler wheels at the drop brackets to make sure the track clears the brackets.

Originally Posted by PCDOC

I put a 16" under my 02 800 cat with a stock tunnel and the only thing you need to do is grind some of the rivets down inside the tunnel. Not sure what you will find for 16" wide and 2.52 pitch track. I changed my drive shaft and axle over to a king cat extrovert setup at the same time and that's the 3 pitch setup.

[PCDOC]

Originally Posted by Booner

Yup. I just threw a 16" track under my 01 800. There's a few rivets I ground down, and I installed 7.12" idler wheels at the drop brackets to make sure the track clears the brackets.

Forgot to mention that. You will need larger upper return idler wheels so the track clears the TSL bracket. It has been a few years since I messed with it.

[Zip]

thanks guys

[dentfixer]

a 159x16x2 1/4 will fit. Have one on my stock 02' Mtn Cat its also a 2.52 came off a 07 Doo XRS. They called it a Challenger Lite, w/foctory rectangle ports.