|
#1
|
||||
|
||||
|
Hey all, whats a good opperating temp for my 99 670X? whats a bad temp? like overheating? (preferably before overheating. ) Bout to get a digital coolant temp gauge and not sure what to look for (cold, warm, hot, shut'er off!, etc). Thanks guys! It will be screwed in the head, next to the DPM sensor.
__________________
PARTING OUT ENTIRE 99 670X. http://www.dootalk.com/forums/index....owtopic=366819 Last edited by eazyduzit509; 01-01-2010 at 09:40 PM. |
|
#2
|
|||
|
|||
|
from about 130 probably more like it ..I would be more concerned about your piston wash , plug color and egts .......and running good gas
just a thought but hey wtf do I know Last edited by H2SNOW; 01-01-2010 at 09:34 PM. |
|
#3
|
||||
|
||||
|
So 130'ish is normal, sounds about right, i was hearing 120's aswell. and 150 is too hot? whats ring damage temp?
__________________
PARTING OUT ENTIRE 99 670X. http://www.dootalk.com/forums/index....owtopic=366819 |
|
#4
|
|||
|
|||
|
Quote:
plug colors and wash is where its at |
|
#5
|
||||
|
||||
|
Lets see what ive figured out...
108-111= Thermostat opens 115-130= Normal 135-155= Warm 160-170= Shut'er down 175-180= Dead Sled (so the factory temp light is more of a "go buy new pistons" light, rather than a warning light... ) Esimate based on google findings and a couple peoples experiances.
__________________
PARTING OUT ENTIRE 99 670X. http://www.dootalk.com/forums/index....owtopic=366819 Last edited by eazyduzit509; 01-01-2010 at 11:45 PM. |
|
#6
|
|||
|
|||
|
phone number required for any furthure asistance
|
|
#7
|
||||
|
||||
|
PM'd.
__________________
PARTING OUT ENTIRE 99 670X. http://www.dootalk.com/forums/index....owtopic=366819 |
![]() |
|
|
| Thread Tools | |
| Display Modes | |
|
|