Aftermarket/Upgrade Do's and Donts to M-Series

[LucasMX358]

I have an 06 M-7 looking for upgrades or tricks ppl know. Dont wanna spend the money on something that does not work, hope this helps everyone out! Lets see what everyone things of certain equipment.

[BigRed118]

Holz suspension bracket, fuel pressure regulator, Bikeman single pipe and y-pipe(w/ stock can), Attitude EFI controller. If you need a track, get the Powerclaw. The BDX airbox works well too on this sled.

[IShartd]

Dos: 2x holz relocation bracket, geo mod, snow eliminators, RKT head, secondary torsional kit.

Dont: Timing key, aftermarket can, twin pipes

[Speedracer]

What exactly does the Holz bracket do? What does it change? Cost?

[Pumpkinpatch]

Holz brkt. is for the 05' - 06' M-series rear suspension. It helps the track from overtightening when compressed.

P.P.

[BigAir]

Originally Posted by Speedracer

What exactly does the Holz bracket do? What does it change? Cost?

It changes the geometry of the front arm. With the stock geometry the track becomes too tight as the suspension compresses, which causes it to bind up.

[LucasMX358]

Lets keep this going guys, i know theres ppl with M-s out there that do or did mods!

[Snodawg]

Holz is selling the bracket for $25 right now plus about $8 shipping. I have a new one in an opened package for $25 shipped if interested.

[Orange06m7]

i had no luck at all with anything BMP sells, had good luck with SLP.

[kraftymike]

Originally Posted by Orange06m7

i had no luck at all with anything BMP sells

x2 tried the bmp stock pipe mod, what a joke!

I tried the slp big horn, HRP brackets, RKT secondary and probably some other stuff I am forgeting too, but the only thing that made a instant contribution to the sled was a set of side panel vents. They really helped it breathe and clean up that low end bog.