Go Back   Back Country Rebels - Forums > REBELS WITH A WRENCH > BRAND SPECIFIC TECH / DISCUSSION > ARCTIC CAT
Reload this Page Motor mount help
Register Classifieds BCR Store FAQ Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 12-09-2009, 08:53 AM
Ausm7499's Avatar
Ausm7499 Ausm7499 is offline
Senior Member
  
Join Date: Nov 2009
Location: Lewiston, Idaho
Posts: 235
Ausm7499 is an unknown quantity at this point
Default Motor mount help
I have one of those belt eating M1K so I ordered another motor mount and a torque stop to try and resolve this problem. I have the motor mount and torque stop but the mounting brackets are on back order and I can't wait tell mid January for these parts. I think I can fabricate part #19 easy enough but I don't know what to do for part #20. Any ideas about how I can fabricate that part or can any body thing of anything off the shelf that will work?



Here is a pic of what it will look like installed.



Any help would be appreciated.
__________________
Certified Amsoil Dealer
Reply With Quote
  #2  
Old 12-09-2009, 10:51 PM
m8magic's Avatar
m8magic m8magic is offline
REBEL
  
Join Date: Nov 2009
Location: yukon
Posts: 1,210
m8magic is on a distinguished roadm8magic is on a distinguished roadm8magic is on a distinguished roadm8magic is on a distinguished roadm8magic is on a distinguished road
m8magic is on a distinguished roadm8magic is on a distinguished roadm8magic is on a distinguished roadm8magic is on a distinguished roadm8magic is on a distinguished roadm8magic is on a distinguished roadm8magic is on a distinguished roadm8magic is on a distinguished roadm8magic is on a distinguished roadm8magic is on a distinguished roadm8magic is on a distinguished roadm8magic is on a distinguished roadm8magic is on a distinguished roadm8magic is on a distinguished road
Default
saddle from a heavy duty muffler clamp..handle bar clamp..riser clamp...connecting rod cap..if i am seeing right...lol
__________________
07/m8 Terraalps 900 bigbore kit, bmp ypipe and exhaust,jaws silencer,stm valves,bdx oil elimination and bumper kit,fastlane no snows,bdx fuel pressure regulator,dayton adj weights,shift assist,timbersled intake,timbersled mtn tamer rear skid,timbersled barkbuster frt end with fox evols diamond s hood,pure logic box,boss shorty seat,rox risers,koso dual egts koso a/r guage koso water temp guage,bdx steering post solidifier,fastlane 9 inch two wheel kit,rock rollers,Mod ski's
Reply With Quote
  #3  
Old 12-13-2009, 08:29 PM
Arctic Thunder Arctic Thunder is offline
Member
  
Join Date: Nov 2009
Posts: 32
Arctic Thunder is an unknown quantity at this point
Default
Did you get this part yet?

Your in Lewiston right?

If so call Howell Machine down on main street. They are pretty good.

Measure the OD of the tube. Take the bracket down to them and have them get you a piece of alumin and make it.

One other idea would be to talk Bud's saw service in Cottonwood. See if he has anything you can salvage. This same bracket was used on everything from the M7's up. I think.

Thunder
Reply With Quote
  #4  
Old 12-13-2009, 09:25 PM
76FoMoCo's Avatar
76FoMoCo 76FoMoCo is offline
Captain Stick Head
  
Join Date: Nov 2009
Location: Nampa, Idaho
Posts: 3,924
76FoMoCo Almost as famous as pro rider Kevan 'DRINK' Drinkle76FoMoCo Almost as famous as pro rider Kevan 'DRINK' Drinkle76FoMoCo Almost as famous as pro rider Kevan 'DRINK' Drinkle76FoMoCo Almost as famous as pro rider Kevan 'DRINK' Drinkle
76FoMoCo Almost as famous as pro rider Kevan 'DRINK' Drinkle76FoMoCo Almost as famous as pro rider Kevan 'DRINK' Drinkle76FoMoCo Almost as famous as pro rider Kevan 'DRINK' Drinkle76FoMoCo Almost as famous as pro rider Kevan 'DRINK' Drinkle76FoMoCo Almost as famous as pro rider Kevan 'DRINK' Drinkle76FoMoCo Almost as famous as pro rider Kevan 'DRINK' Drinkle76FoMoCo Almost as famous as pro rider Kevan 'DRINK' Drinkle76FoMoCo Almost as famous as pro rider Kevan 'DRINK' Drinkle
Default
any pipe clamp or muffler clamp with even close to the right od jus put a piece of rubber inner tube folded over to take up the odd space.
__________________
TEAM IDAHO MILITIA
Reply With Quote
  #5  
Old 12-14-2009, 10:07 AM
Arctic Thunder Arctic Thunder is offline
Member
  
Join Date: Nov 2009
Posts: 32
Arctic Thunder is an unknown quantity at this point
Default
Quote:
Originally Posted by 76FoMoCo View Post
any pipe clamp or muffler clamp with even close to the right od jus put a piece of rubber inner tube folded over to take up the odd space.
You are probably right here. But in this case if you mount the motor mount vertically all the force on the motor mount will be in the horizontal direction. If it isn't clamped TIGHT, REALLY TIGHT it will want to twist on the shaft. So you can do whatever but if it isn't solid it will turn on the shaft. Especially with the long lever arm of the mount.

(Not to say anything here but, this is the reason I mounted mine horizontally and to the bottom of the motor rather than the side like the drawing.) With my mounting position it is strictly a push/pull rather than a twist.

Thunder
Reply With Quote
  #6  
Old 12-14-2009, 10:56 AM
Ausm7499's Avatar
Ausm7499 Ausm7499 is offline
Senior Member
  
Join Date: Nov 2009
Location: Lewiston, Idaho
Posts: 235
Ausm7499 is an unknown quantity at this point
Default
A guy in spokane had a few made so I picked one up off of him.
__________________
Certified Amsoil Dealer
Reply With Quote
Reply
Back Country Rebels - Forums > REBELS WITH A WRENCH > BRAND SPECIFIC TECH / DISCUSSION > ARCTIC CAT

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 07:36 PM.

Contact Us - Archive - Top
 

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Managed by wDa @ WD ™

Designed by Military Ltd