Go Back   Back Country Rebels - Forums > THE TRENCH > RIDING AREAS - USA > ALASKA

Reply
 
Thread Tools Display Modes
  #1  
Old 12-17-2013, 09:48 PM
dstrbdxpak's Avatar
dstrbdxpak dstrbdxpak is offline
REBEL
 
Join Date: Nov 2011
Location: Wasilla, Ak
Posts: 991
dstrbdxpak Has earned a rub and tug from AR
dstrbdxpak Has earned a rub and tug from AR
Default Anch- small parts machine job

Whom in Anch would you recommend to mill out a mount? I will do it myself but would prefer a very clean result.

I need 3 slots machined down trough the mount block to accept a GoPro head.




__________________
-12 Pro
Kinda stock.

Last edited by dstrbdxpak; 12-17-2013 at 10:05 PM.
Reply With Quote
  #2  
Old 12-17-2013, 11:32 PM
SNWMBL's Avatar
SNWMBL SNWMBL is offline
REBEL
 
Join Date: Feb 2010
Location: Eagle River, AK
Posts: 1,148
SNWMBL Has earned a rub and tug from ARSNWMBL Has earned a rub and tug from ARSNWMBL Has earned a rub and tug from ARSNWMBL Has earned a rub and tug from AR
SNWMBL Has earned a rub and tug from ARSNWMBL Has earned a rub and tug from ARSNWMBL Has earned a rub and tug from ARSNWMBL Has earned a rub and tug from ARSNWMBL Has earned a rub and tug from ARSNWMBL Has earned a rub and tug from ARSNWMBL Has earned a rub and tug from ARSNWMBL Has earned a rub and tug from AR
Default

I've always had good luck using Superior Machine, they don't mind small jobs.
__________________
Every ounce counts
Reply With Quote
  #3  
Old 12-17-2013, 11:35 PM
Sheetmetalfab Sheetmetalfab is offline
Prospect
 
Join Date: Feb 2012
Posts: 309
Sheetmetalfab Has earned a rub and tug from ARSheetmetalfab Has earned a rub and tug from ARSheetmetalfab Has earned a rub and tug from ARSheetmetalfab Has earned a rub and tug from ARSheetmetalfab Has earned a rub and tug from ARSheetmetalfab Has earned a rub and tug from ARSheetmetalfab Has earned a rub and tug from ARSheetmetalfab Has earned a rub and tug from ARSheetmetalfab Has earned a rub and tug from ARSheetmetalfab Has earned a rub and tug from ARSheetmetalfab Has earned a rub and tug from ARSheetmetalfab Has earned a rub and tug from AR
Default

......
Reply With Quote
  #4  
Old 12-17-2013, 11:38 PM
Sheetmetalfab Sheetmetalfab is offline
Prospect
 
Join Date: Feb 2012
Posts: 309
Sheetmetalfab Has earned a rub and tug from ARSheetmetalfab Has earned a rub and tug from ARSheetmetalfab Has earned a rub and tug from ARSheetmetalfab Has earned a rub and tug from ARSheetmetalfab Has earned a rub and tug from ARSheetmetalfab Has earned a rub and tug from ARSheetmetalfab Has earned a rub and tug from ARSheetmetalfab Has earned a rub and tug from ARSheetmetalfab Has earned a rub and tug from ARSheetmetalfab Has earned a rub and tug from ARSheetmetalfab Has earned a rub and tug from ARSheetmetalfab Has earned a rub and tug from AR
Default

Quote:
Originally Posted by Sheetmetalfab View Post
......

like that?
Reply With Quote
  #5  
Old 12-18-2013, 01:15 AM
dstrbdxpak's Avatar
dstrbdxpak dstrbdxpak is offline
REBEL
 
Join Date: Nov 2011
Location: Wasilla, Ak
Posts: 991
dstrbdxpak Has earned a rub and tug from AR
dstrbdxpak Has earned a rub and tug from AR
Default

I need 3 passes on a mill. Slots added to the current mount. This particular light has no flat base.

I could do it several ways, but this would be the most solid. Heck I could've busted it out with a Dremel but I wanted a clean end.

Hopefully the paint marks show well.
__________________
-12 Pro
Kinda stock.
Reply With Quote
  #6  
Old 12-18-2013, 01:19 AM
icr's Avatar
icr icr is offline
i dunno
 
Join Date: Nov 2009
Location: anchorage
Posts: 3,366
icr Has earned a rub and tug from ARicr Has earned a rub and tug from ARicr Has earned a rub and tug from ARicr Has earned a rub and tug from AR
icr Has earned a rub and tug from ARicr Has earned a rub and tug from ARicr Has earned a rub and tug from AR
Default

Superior would be my first try. Unique will do it and it'll be perfect, but it won't be cheap.
__________________
Quote:
Originally Posted by therealhatchers View Post
It's only gay if you make eye contact
Reply With Quote
  #7  
Old 12-18-2013, 01:22 AM
dstrbdxpak's Avatar
dstrbdxpak dstrbdxpak is offline
REBEL
 
Join Date: Nov 2011
Location: Wasilla, Ak
Posts: 991
dstrbdxpak Has earned a rub and tug from AR
dstrbdxpak Has earned a rub and tug from AR
Default

Quote:
Originally Posted by icr View Post
Superior would be my first try. Unique will do it and it'll be perfect, but it won't be cheap.

In all honesty while I'm not a cheap skate, there is a point where I'll do it myself. Lol

I do have an idea making a router via Dremel. Crude but effective.
__________________
-12 Pro
Kinda stock.
Reply With Quote
  #8  
Old 12-18-2013, 02:12 AM
AKSNOWRIDER's Avatar
AKSNOWRIDER AKSNOWRIDER is offline
'AKWALKSWITHCHUBBY'
 
Join Date: Nov 2009
Location: Anchorage Alaska
Posts: 6,467
AKSNOWRIDER Offical PLPAKSNOWRIDER Offical PLPAKSNOWRIDER Offical PLPAKSNOWRIDER Offical PLP
AKSNOWRIDER Offical PLPAKSNOWRIDER Offical PLPAKSNOWRIDER Offical PLPAKSNOWRIDER Offical PLPAKSNOWRIDER Offical PLPAKSNOWRIDER Offical PLPAKSNOWRIDER Offical PLPAKSNOWRIDER Offical PLP
Default

Quote:
Originally Posted by dstrbdxpak View Post
In all honesty while I'm not a cheap skate, there is a point where I'll do it myself. Lol

I do have an idea making a router via Dremel. Crude but effective.
Stop over at Anchorage Dragbike and talk to Dave..he should be able to do it no problem...
Reply With Quote
  #9  
Old 12-18-2013, 04:27 PM
dstrbdxpak's Avatar
dstrbdxpak dstrbdxpak is offline
REBEL
 
Join Date: Nov 2011
Location: Wasilla, Ak
Posts: 991
dstrbdxpak Has earned a rub and tug from AR
dstrbdxpak Has earned a rub and tug from AR
Default

Got a few quotes based on the above recommendations, I'll kill it with my Dremel.

Thanks
__________________
-12 Pro
Kinda stock.
Reply With Quote
  #10  
Old 12-19-2013, 02:31 AM
dstrbdxpak's Avatar
dstrbdxpak dstrbdxpak is offline
REBEL
 
Join Date: Nov 2011
Location: Wasilla, Ak
Posts: 991
dstrbdxpak Has earned a rub and tug from AR
dstrbdxpak Has earned a rub and tug from AR
Default

Beer and Dremel.

Rigid SMR2 driving light. Little bastid is pretty bright. Hot from the 12v plug on my sled, next step is making a few LiPo packs.

Sure beats the $375 tag from the turn key helmet lights.



__________________
-12 Pro
Kinda stock.
Reply With Quote
Reply
Back Country Rebels - Forums > THE TRENCH > RIDING AREAS - USA > ALASKA

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 12:41 AM.

 

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Managed by wDa @ WD ™

Designed by Military Ltd